The powerful CS-999 processes round cables upto 4mm outer diameter and strips both sides upto 30mm.
It has powerful cutting and transport drives for higher production rates and has a program memory capacity of upto 200 wires with all the processing parameters. Widley used in PVC, teflon, silicone and fibre glass cables.
The CS-999 is designed in PLC based with hybrid stepper motors and HMI.
Features
Quick change guide tubes and blades.
Simple operation of HMI (TFT Touch Screen)
User friendly operation.
Quick programming.
Mid-strip facility available (optional)
Short length cables with both sides stripping (from 10mm to 50mm both side stripping)
Can process small gauge of twin parallel & flat ribbon cables.
Advantages
Stripping lengths - Partial strip.
Stripping lengths - full strip.
Mid-strip facility for small cables (optional)
Inch mode option to set the blades as per cables.
Step run option to trace the problem if the machine should malfunction.
Less wastage.
Counter option.
No wire signal with machine stop option.
Auto start delay facility to run in continues production.
Technical Specifications
Wire Size Range - 0.2 - 3.0mm (12 AWG)
Maximum Outer Cable Diameter - 4.0mm (0.15 inch)
Wire Length - 10mm to 1000mm (0.39 to 3937 inches)
Stripping Length Increment - 0.1mm (0.003 inch)
Stripping Length Left Side - 30mm (1.18 inch)
Stripping Length Right Side - 30mm (1.18 inch)
Cycle Time - Approx 1 sec
Power Supply - 230 to 240V (50/60 Hz) (optional 110V)
Dimensions (L x W x H) - 425 x 320 x 325mm (16.7 x 12.5 x 12.7 inches)
Net Weight - 30 kgs
Running Options: Step mode, test, single and run mode.
Feed Rate: 10 to 100% (500mm to 1000mm) (19.6 to 39.3 inches)
Blades: HSS / Carbide)
Noise Level: Less than <70db